Allenheath WAVES User Guide Manual de usuario

1 M-WAVES AUDIO INTERFACE1 ALLEN & HEATH M-WAVES CARDUSER GUIDE

10 M-WAVES AUDIO INTERFACE2.3 Configuring the M-Waves in SoundGrid StudioThis is a quick overview of what you need to know about SoundGrid Studio so

11 M-WAVES AUDIO INTERFACEWhen SoundGrid Studio opens you will see the System Inventory page. The rst time you launch SoundGrid Studio, the Wizard

12 M-WAVES AUDIO INTERFACEIf the Wizard cannot locate the requested SoundGrid network devices, this means you may have chosen an incorrect network p

13 M-WAVES AUDIO INTERFACETo add another SoundGrid device, click on the arrow in an empty rack slot. From the list of available devices, choose the

14 M-WAVES AUDIO INTERFACE2.3.2 Firmware Status and UpdatesOn the left of the device icon are two buttons:FW indicates the status of the device’s r

15 M-WAVES AUDIO INTERFACE3. M-WAVES CONTROL PANEL (V2 ONLY) If you are working with MultiRack SoundGrid, access the M-Waves V2 Control Panel via th

16 M-WAVES AUDIO INTERFACESTATUS displays synchronization status (Sync or No Sync).CURRENT CLOCK SOURCE IS displays the current sync method.SOE disp

17 M-WAVES AUDIO INTERFACE3.3 System Info Page The System Info page displays the device’s connection status, manufacturer, model, MAC and SoE Master

18 M-WAVES AUDIO INTERFACE4. WORKING WITH TWO M-WAVES CARDSYou can use M-Waves V1 and V2 Cards in the same setup. The only limitation is that a rst

19 M-WAVES AUDIO INTERFACE2. If you want the iLive system to get its source from Port B: (a) On the iLive system, set Audio Clock Source to Port B.

M-WAVES AUDIO INTERFACETable of ContentsIntroduction 31. Hardware and Connectors 72. Installation and Conguration Overview 8 2.1 Installing the M-

3 M-WAVES AUDIO INTERFACEINTRODUCTIONThank you for choosing an Allen & Heath M-Waves Card for SoundGrid systems. In order to get the most out o

4 M-WAVES AUDIO INTERFACE Redundancy and recovery options Built-in 3-port Gigabit switch for direct connection to multiple devices ASIO/C

5 M-WAVES AUDIO INTERFACENative: In a Native conguration, the M-Waves card is used in order to connect a console to the SoundGrid ASIO/Core Audio d

6 M-WAVES AUDIO INTERFACENative/SoundGrid Comparison TableFeatures Native SoundGridLow Latency Processing Recording Simultaneous Recording and

7 M-WAVES AUDIO INTERFACE1. HARDWARE AND CONNECTORSSoundGrid Ports 1-3 (Ethernet) connect the SoundGrid Network. Status LED: SoundGrid Ports 2 and 3

8 M-WAVES AUDIO INTERFACE2. INSTALLATION AND CONFIGURATION OVERVIEWThe ASIO/Core Audio drivers and control panel for the Allen & Heath M-Waves

9 M-WAVES AUDIO INTERFACE2.2 Configuring the M-Waves in MultiRack SoundGridAccess the M-Waves control panel via the Inventory window in the MultiRac